Jumper JPD-500A
Device Model:
JPD-500A
Manufacturer:
Jumper Medical Equipment Co. Ltd., Jumper Building, 71-4 Xintian Avenue, Fuyong Street, Baoan District, Shenzhen, Guangdong ProvInce 518103, CHINA.
Measuring functions:
SpO2, Pulse Rate
Primary Client Use:
Intended for self-measurement and home use
Measurement Site:
Finger
Measurement Occurrence:
Single measurements only
Availability:
Available Currently
Description:
The Jumper JPD-500A is an automatic pulse oximeter. Although its oxygen saturation measurement technology has been evaluated, it is not possible to base a determination on its accuracy from this research. Oxygen saturation measurements are taken from the finger. It is intended for self-measurement and home use.
Assessment:
The technology used in the Jumper JPD-500A, to measure peripheral oxygen saturation, has been assessed, in a general population, according to a non-standard protocol.
Recommendations:
| Accuracy Assessment | Recommendation | Basis | |
| SpO2 | Medaval | None | When an evaluation is carried out using a non-standard protocol, no inference can be made on accuracy based on a standard protocol. |
Validation Publications:
Lipnick MS, Feiner JR, Au P, Bernstein M, Bickler PE. The Accuracy of 6 Inexpensive Pulse Oximeters Not Cleared by the Food and Drug Administration: The Possible Global Public Health Implications. Anesth Analg. 2016 Aug;123(2):338-45. doi: 10.1213/ANE.0000000000001300. PMID: 27089002.
Ad Hoc protocol General population (Note: Modified ISO 80601-2-61:2011 study)